Analog Modules for ADwin-Pro II

Interfaces for analog signals

The analog modules for ADwin-Pro II systems are the best solution for time-critical tasks. The analog inputs have a resolution of up to 18 bit and offer sample rates up to 50 MHz. 256 MB of data memory is available for temporary data storage on modules with parallel analog inputs. The processor T11 accesses the measurement values of the ADC modules via the ADwin-Pro II bus with up to 200 MB/s.

Pro II Analog Module Analog input modules

  • Multiplexed inputs
    • 8 / 16 differential or 32 single-ended channels
    • ADC resolution 18 bit; conversion time 2 µs
    • voltage range ±10V, optional ±30V
    • Multiplexer settling time 2 µs
    • optional with low-pass filter:
      Butterworth 4th order with 5kHz, 10kHz, or 50kHz
    • optional with TiCo processor
  • Parallel analog inputs
    • one ADC per channel for synchronous sampling
    • 4 or 8 differential channels
    • resolution 14, 16 or 18 bit
      • 14 bit: conversion time 0.02 µs
      • 16 bit: conversion time 0.25 µs
      • 18 bit: conversion time 2.0 µs
    • voltage range ±10V, optional ±30V
    • On-board memory 256 MB RAM
    • Build-in edge detection for comparator purposes
    • optional with low-pass filter: Butterworth 4th order with 5kHz, 10kHz, or 50kHz
    • 16 bit module: optional mean value calculation from a defined number of measurement values

Analog output modules

The analog output modules allow synchronous data output on 4 or 8 channels without time offset. The DACs have a resolution of 16 bit and and offer a large band with.

  • Pro II AOut-4/16, Pro II AOut-8/16
    • 4 or 8 channels
    • 16 bit resolution
    • voltage range ±10V
    • Settling time 3 µs
    • Data output 10 times faster than on Pro I modules
    • optional with TiCo processor
    • connector selectable:
      LEMO 1-pole / LEMO 2-pole / D-SUB / BNC
  • Pro II AOut-1/16
    • 1 analog output
    • 16 bit resolution
    • voltage range ±2V at 50Ω
    • output frequency 50 MHz
    • Settling time 15 ns
    • ramp interpolation
    • 32 TTL IOs, usable in parallel to analog output
    • with TiCo

Please, request further information here.

© Jäger GmbH 2005-2019- Editorial details - Sitemap - Last change 2019-05-23