ADwin-Pro II: Bus Modules

Communication in all directions

ADwin-Pro II modules work with various bus systems and serial interfaces. An ADwin-Pro II system can simultaneously send messages and data via RS232, communicate with devices via CAN bus, and control a test stand.

The following interfaces are available:

  • Pro II-RSx-2/-4: 2/4 x RS-232 / RS-485 (software-selectable), with TiCo processor
  • Pro II-RS422-4: 4 x RS-422, with TiCo
  • Pro II-CAN-2: 2 x 2 CAN bus, low speed or high speed (CAN 2.0 part A+B, ISO 11898),
    incoming CAN messages can rise a CPU event. Module includes a TiCo processor.
  • New product Pro II-CAN-FD: 2 CAN FD interfaces, compatible with CAN 2.0 (high-speed). Transferring and receiving with up to 8 MBit/s; optional time stamps for transfer/receive; automatic switching between nominal and data bit rate.
  • Pro II-LIN-2: 2 x LIN Bus
  • Pro II-LS-2: 2 interfaces to a bi-directional serial bus with 5MHz clock rate, runs with module HSM-24V which processes 24 Volt signals.
  • Pro II-Profi-SL: 1 x Profibus with slave interface
  • Pro II-Flex-2: 2 x FlexRay; each controller is provided with 2 channels
  • Pro II-EtherCAT-SL: 1 x EtherCAT with slave interface, with TiCo
  • Pro II-SENT-4: 4 x inputs with comparator / filter according to SENT specification. Supports Fast channel, Serial message, automatically detects error, sensor frequency, filler pulse
  • Pro II-SENT-6: 6 x inputs with comparator / filter according to SENT specification. Supports Fast channel, Serial message, automatically detects error, sensor frequency, filler pulse. 4 digital inputs and 4 digital outputs with TTL levels.
  • Pro II-SENT-4-Out: 4 x outputs according to SENT specification, supprting Fast channels and Serial message. Several sending modes. Configurable: Base clock, filler pulse, type of CRC checksum. 4 digital inputs and 4 digital outputs with TTL levels.
  • Pro II-SPI-2: 2 x SPI interface, single-ended or differential, each interface configurable as SPI master or SPI slave, several TTL-I/Os, with TiCo
  • Pro  II-MIL-1553: 1 x MIL STD-1553 interface, 2 bus connectors, 1 MBit/s, supports bus monitor 16 Bit SMT
  • Pro II-ARINC-429: 1 x ARINC-429 interface with 1 transmitter and 2 receivers, high speed (100 kHz) / low speed (12.5 kHz), with TiCo
  • Other field bus interfaces on request

Please, request further information here.

© Jäger GmbH 2005 - 2018- Editorial details - Sitemap - Last change 2018-06-29